Nancy’s Archives

HomeAcre Hop Sponsors

Pint Size Farm button
The Self Sufficient HomeAcre
Oak Hill Homestead
Clearwater Farm Journal
Our Simple Life

My Garden: Making a Veggie Hod

Print Friendly

First of all you may be wondering what a “hod” is! According to dictionary.com com a hod is a portable trough for carrying mortar, bricks etc., fixed crosswise on top of a pole and carried on the shoulder. I found these directions on runnerduck.com and thought it would be a perfect solution for carrying in vegetables from the garden. My husband took one look at the directions and decided to make a few modifications. Now I have my own custom made Veggie Hod! Here’s what you need from the original directions:

  • 1 x 6 inch cedar 3 feet long
  • ½ inch wire mesh 16 by 16 inches
  •  ¾ inch dowel
  • Carpenters glue
  • Nails
  • Staples

We had some leftover ¾ inch cedar siding that was perfect for the project.

prudent living

Leftover Cedar Siding.

Cut the ends 5 ½” by 8”.

re-using

Cutting the ends.

Radius the two bottom corners using a 1 quart paint can as a guide.

recycle

Using a paint can as a guide.

Using a band saw or jig saw (shown) cut the corner radius.

veggie hod

Cut the corner radius.

Cut the two side rails 1 by ¾ by 16 inches.

veggie hod

Cut the side rails.

Veggie Hod wood parts list cut from ¾ inch cedar: 2 ends 5 ½ x 8″, 2 side rails 1 x ¾ x 16″, 2 handles 1 ½ x 12″, and a 3/4 inch dowel 17 ½ inches long.

prudent living

Veggie Hod wood parts.

Cut a ¾ x 1 inch notch in each top corner of the end pieces for the side rails.

Veggie hod

Marking the notch to cut.

End pieces rough cut and ready for sanding.

Veggie Hod

Ready for sanding.

Cut the mesh 16 by 16 inches. Cut the wire very close to the cross wires to eliminate sharp, pointy wires. Bend one edge of the mesh 90 degrees, ½ inch in from the edge.

Veggie Hod

Cut the wire mesh.

Staple that ½ inch edge to the bottom of one of the sides.

Veggie Hod.

Staple the wire mesh.

Align the side in one of the end notches and wrap the mesh around to mark your bend point for the other side. When you have this mark bend the mesh 90 degrees and staple to the other sidepiece.

Veggie Hod

Staple 90 degree bent wire mesh edges to the bottom of each side rail.

Fasten the side rails to the end pieces with 1 ½ inch screws.

Veggie Hod

Fasten the side rail.

End pieces attached to side rails with wire mesh.

Veggie hod.

Ends attached,

Drill ¾ holes at top end of handle. Draw out half-round for cut to finish.

Veggie Hod

Drill holes.

Handle ends shaped and finished.

Veggie Hod

Finished handles.

Attach handles to the center of each end piece with two 1 ¼ inch screws.

Veggie Hod

Attach handles.

Slide the dowel into the handles and mark any excess dowel length and trim off. Dab some wood glue into the handle holes and insert dowel. Tap a 1 inch brad through the handle into the dowel to secure.

gardening

Veggie Hod

I can’t wait to use my Veggie Hod, it will be perfect for gathering the harvest from the garden, I’ll even be able to give the vegetables a quick wash before coming into the house.

Veggie Hod

Waiting for a coat of stain!

Since my husband made four of these I’m thinking of a winter giveaway, good idea?

Linked to: FrugallySustainable, GingerSnapCrafts, TheThriftyHome, WeAreThatFamily, MsGreenthumbJean, MindBodyandSoleASouthernDaydreamer, AdornedFromAbove, LocalSugarHawaii, AGlimpseInside, KatherinesCorner, Seven-Alive, BrambleberryCottage, BlissfulRhythm, LiveRenewed, SimpleLivesThursday, HomemakersChallenge, DelightfulOrder, TootsieTime, NoOrdinaryHomestead

23 Responses to My Garden: Making a Veggie Hod

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Find Us:

     
Follow Who? Social Weekend Hop

Grab My Button


Follow on Bloglovin